Your Cart (0)
New RHT-DM Duct Mounted Humidity, Dew Point and Temperature Transmitter
Overview
The RHT-DM duct mounted temperature and humidity transmitters incorporate the best high accuracy and great stability relative humidity and temperature sensors. The RHT-DM convert the measured values into linear 4 to 20 mA signals or optionally 0 to 10 Vdc output. The microprocessor based circuit enables full configuration of output range when used with the optional TxConfig PC interface and the Windows® based software. The humidity signal can be configured to either relative humidity or dew point output.Features
- New Two Probe Materials 316 Stainless Steet Or PA-GF
- Two Probe Lenghts Available 150mm or 250mm
- Microprocessor Based Humidity and Temperature Transmitter
- Field Programable with Optional TxConfig-USB configuration interface and SigNow software
- Two-wire loop powered 4 to 20mA
- Isolated 4 to 20mA outputs
- Accuracy Relative Humidity: ±3 % RH @ 77°F (25°C)
- Temperature Accuracy ±0.72°F (0.4°C) @ 77°F (25°C)
- Power 12Vdc to 30Vdc
- Electronic circuit case IP65; Sensors housing IP40
Price Starting At:
$171.00
$171.00
Shipping Estimated Shipping 1 to 4 Weeks
RHT-DM Humidity Measurement Specifications
Sensor Measuring Range | Temperature: -40 to 248°F (-40 to 120°C) Relative Humidity: 0 to 100% RH (non-condensing) Dew Point: -148 to 217.4°F (-100 to 103°C) |
Response Time: | Temperature: up to 30s @ 77°F (25°C) with air moving at 1 m/s or 3.28 ft/s Humidity: up to 8s @ 77°F (25°C) with air moving at 1 m/s or 3.28 ft/s |
Measurement Accuracy: | Temmperature: ±0.72°F (0.4°C) @ 77°F (25°C) Relative Humidity: ±3 % RH @ 77°F (25°C) |
Analog Outputs | 4 to 20 mA or 20 to 4 mA, 2-wire type, loop-powered |
Analog Outputs Resolution: | 0.0008 mA |
Operating Temperature |
-4 to 158°F (-20 to 70°V), 0 to 95% RH |
Connections:> | Internal terminal block, via cable glands |
Housing Material | Housing (WM/DM models) in PA-GF |
Housing and Sensor Ratings | Enclosure: IP65, Sensor: IP40 |
Configuration | Optional TxConfig-USB configuration interface and SigNow software for Windows or Android |
RHT-WM General Specifications
Power Supply | 12Vdc to 30Vdc |
Outputs | 4 to 20mA 2-wire loop power supply |
Output Load | RL (max. in Ohms) = (Vdc - 12)/ 0.02, where: Vdc = Supply Voltage in Volts. |
OUT1 and OUT2 Output Resolution | 0.0008 mA (4-20 mA) |
Isolation between outputs | Isolated 4-20 mA outputs. |
Reverse Polarity Protection | Yes |
Cable Gland | Compress fitting PG7 |
Case Dimension | 2.8" (70mm) W x 2.4" (60mm) H with Probe 3.1" (78.5mm) |
Related Products