Thumbnail Filmstrip of MP82710-H HART® Programmable 2-Wire 4 to 20mA Temperature Transmitter Images

MP82710-H HART® Programmable 2-Wire 4 to 20mA Temperature Transmitter

Overview

The Mp82710H is an advanced 2-wire head-mounting programmable transmitter with HART^® Protocol is avaliable with the optional ATEX Intrinsically Safe Approval Standard. Able to fit in a small, standard connection head, it is easily programmed in the field to your exact requirements via an optional communication interface and "Point N Click" PC based software and provides a simultaneous analog and digital (HART^® Protocol) outputs over a single twisted pair of wires.

Features

Optional ATEX Ex II 1 G Ex ia IIC T4...T6 Ga Approval
Microprocessor-Based, HART® Protocol
Universal Input - Thermocouples, RTD's, millivolts and Ohms
Field Programmable with optional Programming Kit and PC Software
Fully-Isolated and Linearized
RFI/EMI-Immune
High Accuracy 0.1%
Small Size (1.7" dia. x 1.1"H)
Optional Plug-In Display and Protection Head
Thermocouple Input Types: K, J, L, T, U, E, R, S, B, C, D, N
RTD Input: Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100
IP30 Housing

Price Starting At:
$240.00

Need help? Contact us with questions.

Shipping Click Add to Cart to Select Temperature Sensor, Scale and Range
Estimated Shipping 1 week

Data Sheet User Manual

MP82710-H HART® Transmitter Specifications

Input Types	Thermocouple - J, K, T, E, N, R, S, B, C, D, L and U RTD - Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100
Minimum Span	See Range and Accuracy Table Below
Optional Approval	ATEX Ex II 1 G Ex ia IIC T4...T6 Ga
Housing Dimension with Optional Read-Out	1.85" Dia. x 1.42" H (47mm Dia. x 36mm H)
Linearization	On/Off
Power Supply	10 to 40Vdc, Polarity Protected
Supply Effect	± 0.001%/V
Zero Drift	±0.01%/°C or ±0.02°C/°C
Span Drift	±0.005%/°C or ±0.01°C/°C
Long Term Drift	±0.05%/Year
Cold Junction Drift	±0.01°C/°C
Excitation Current RTD	0.1mA
Sensor Lead Resistance RTD	500 Ohm maximum
Zero Sensor Lead Resistance Effect	0.001°C/Ohm
Sensor Lead Resistance TC	10,000 Ohm maximum
Open Circuit Detection	Up/Down
Load Capability	Vbat-12 V/20mA
Startup Time	± 10 sec.
Warm-up Time	± 5 minutes
Isolation	500 VDC/1500 VAC
Ambient Operating Temperature	-40 to + 85°C (-40 to 185°F)/td>
Storage Temperature	-40 to +100°C (-40 to 212°F)
Ingress Protection	IP30
Housing Material	Zinc Alloy (ZAMAK 5) epoxy coated
Housing Dimension	1.7" Dia. x 0.99" H (43mm Dia. x 27mm H)
Housing Dimension with Optional Read-Out	1.85" Dia. x 1.42" H (47mm Dia. x 36mm H)

MP82710-H Transmitter Thermocouple Range, Accuracy and Minimum Span Table

Sensor Type	Temperature Range	Minimum Span
Type K (NiCr-NiAl)	-454 to 2498°F -270 to 1370°C	90°F 50°C
Type J (Fe-CuNi)	-328 to 2192°F -200 to 1200°C	90°F 50°C
Type T (Cu-CuNi)	-454 to 752°F -270 to 400°C	90°F 50°C
Type E (NiCr-CuNi)	-454 to 1832°F -270 to 1000°C	90°F 50°C
Type N (NiCrSi-NiSiMg)	-454 to 2372°F -270 to 1300°C	45°F 25°C
S (Pt10%Rh-Pt)	-76 to 3200°F -60 to 1760°C	450°F 250°C
R (Pt13%Rh-Pt)	-76 to 3200°F -60 to 1760°C	450°F 250°C
B (Pt30%Rh-Pt6%Rh)	32 to 3308°F 0 to 1820°C	1080°F 600°C
C (W5%Re-W26%Re)	32 to 4172°F 0 to 2300°C	270°F 150°C
D (W3%Re-W25%Re)	32 to 4172°F 0 to 2300°C	270°F 150°C
U (DIN Cu-CuNi)	-328 to 1112°F -200 to 600°C	90°F 50°C
L (DIN Fe-CuNi)	-328 to 1652°F -200 to 900°C	90°F 50°C
Millivolt	0 to 1000mV	10mV

MP82710-H RTD Range, Accuracy and Minimum Span Table

Sensor Type	Temperature Range	Minimum Span
Pt100 IEC751	-328 to 1562°F -200 to 850°C	45°F 25°C
Pt250 IEC751	-328 to 1562°F -200 to 850°C	45°F 25°C
Pt500 IEC751	-328 to 1562°F -200 to 850°C	45°F 25°C
Pt1000 IEC751	-328 to 1562°F -200 to 850°C	45°F 25°C
Ni100 IEC751	-76 to 482°F -60 to 250°C	45°F 25°C
Ni500 IEC751	-328 to 1562°F -200 to 850°C	45°F 25°C
Ni1000 IEC751	-328 to 1562°F -200 to 850°C	45°F 25°C
Ohm	0 to 9999Ω	100Ω