C100 Precision Documenting Multifunction Temperature and Process Calibrator

C100 Multifunction Temperature and Process Calibrator Specifications

Display	240 x 320 pixel liquid crystal graphical display with backlite and contrast control
Operating Temperature	-10 to 50°C (+14 to 122°F)
Operating Humidity	20 to 80% non-condensing
Storage Temperature	-30°C to +60°C (-22°F to 140°F)
Power Requirements	A pack of Ni-MH, 1.8 Ah rechargeable batteries
Battery Life	5 to 10 hours, depending on the functions used
Dimensions	8.3" W x 4.3" W x 2" D (210 x 110 x 50mm)
Weight	2 lbs. (900 g)
CE - EMC	EN50082-1 and EN55022: 1994 Class B
Memory	10,000 data stored and recalled on screen as curve or list
Optional Software	DATACAL calibration software for configuration and data management
Serial Communications	USB
Safety Protections	Electronic protection up to 250 V for ‘voltage’ wires Fuse protection for ‘current’ wires Protection against ‘current’ circuit breaking during inductive resistance measurements
EMC conformity Immunity	EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
Other	Waterproof to IP 54 in accordance with standard EN 60529

C100 Thermocouple Measurement and Simulation Range Specification Table

Download the Data Specification Sheet or the Users Manual for Complete Range and Accuracy Tables

Sensor Type	Temperature Input Range	Temperature Input Resloution	Accuracy 1 Year (Measurement)	Temperature Output Range	Temperature Output Resloution	Accuracy 1 Year (Simulation)
Type J	-210 to +1200°C (-346 to +2192°F)	0.05°C	0.010% RDG + 0.08°C(0.144°F)	-210 to +1200°C (-346 to +2192°F)	0.05°C (0.09°F)	0.013% RDG + 0.07°C(0.126°F)
Type K	-250 to +1372°C (-418 to +2501°F)	0.05°C (0.09°F)	0.010% RDG + 0.08°C(0.14°F)	-240 to +1372°C (-400 to +2501°F)<	0.2°C (0.36°F)	0.010% RDG + 0.08°C(0.14°F)
Type T	-250 to +400°C (-418 to +752°F)	0.2°C (0.36°F)	0.010% RDG + 0.08°C(0.144°F)	-240 to +400°C (-418 to +752°F)	0.2°C (0.36°F)	0.010% RDG + 0.08°C(0.144°F)
Type E	-250 to +1000°C (-418 to +1832°F)	0.1°C (0.18°F)	0.010% RDG + 0.05°C(0.09°F)	-250 to +1000°C (-418 to +1832°F)	0.1°C (0.18°F)	0.010% RDG + 0.05°C(0.09°F)
Type R	-50 to +1768°C (-58 to +3214°F)	0.5°C (0.9°F)	0.010% RDG + 0.2°C(0.36°F)	-50 to +1768°C (-58 to +3214°F)	0.5°C (0.9°F)	0.010% RDG + 0.2°C(0.36°F)
Type S	-50 to +1768°C (-58 to +3214°F)	0.5°C (0.9°F)	0.003% RDG + 0.25°C(0.45°F)	-50 to +1768°C (-58 to +3214°F)	0.5°C (0.9°F)	0.010% RDG +0.2°C(0.36°F)
Type B	+400 to +1820°C (+752 to +3214°F)	0.2°C (0.9°F)	0.010% RDG + 0.25°C(0.45°F)	+400 to +1820°C (+752 to +3214°F)	0.5°C (0.36°F)	0.010% RDG +0.25°C(0.45°F)
Type N	-240 to +1300°C (-400 to +2372°F)	0.2°C (0.36°F)	0.010% RDG + 0.15°C(0.108°F)	-240 to +1300°C (-400 to +2372°F)	0.2°C (0.36°F)	0.010% RDG + 0.06°C(0.108°F)
Type C	-20 to +2310°C (+14 to +4190°F)	0.1°C (0.18°F)	0.010% RDG + 0.15°C(0.27°F)	-20 to +2310°C (+14 to +4190°F)	0.1°C (0.18°F)	0.010% RDG + 0.15°C(0.27°F)
Type PLATINUM	-100 to +1400°C (-148 to +2552°F)	0.05°C (0.18°F)	0.25°C(0.54°F)	-100 to +1400°C (-148 to +2552°F)	0.05°C (0.18°F)	0.3°C(0.54°F)
Type MO	0 to +1375°C (+32 to +2507°F)	0.05°C (0.18°F)	0.010% RDG + 0.06°C(0.108°F)	0 to +1375°C (+32 to +2507°F)	0.05°C (0.18°F)	0.010% RDG + 0.06°C(0.108°F)
Type NiMo/NiCo	-50 to +1410°C (-58 to +2570°F)	0.05°C (0.18°F)	0.010% RDG + 0.30°C(0.54°F)	-50 to +1410°C (-58 to +2570°F)/td>	0.05°C (0.18°F)	0.010% RDG + 0.3°C(0.54°F)
Type U	-200 to +660°C (-328 to +1220°F)	0.05°C (0.09°F)	0.15°C(0.27°F)	-200 to +600°C (-328 to +1112°F)	0.05°C (0.09°F)	0.15°C(0.27°F)
Type L	-200 to +900°C (-328 to +1652°F)	0.05°C (0.09°F)	0.2°C(0.36°F)	-200 to +900°C (-328 to +1652°F)	0.05°C (0.09°F)	0.17°C(0.306°F)

Thermocouples: D and G, for specifications, refer to the instruction manual (Please download) Accuracy is given for cold Junction reference @ 0°C (32°F)
When using the internal reference junction (except couple B) add an additional uncertainty of 0.2 °C at 0°C.
It is possible (thermocouple B excepted) to choose by programming the cold junction localization: External at 0°C, internal (temperature compensation of instrument’s terminals) or manually entered.
Temperature coefficient: <10% of accuracy/°C
Display unit: °C and °F

C100 RTD Measurement and Simulation Range Specification Table

Download the Data Specification Sheet or the Users Manual for Complete Range and Accuracy Tables

Sensor Type	Temperature Input Range	Temperature Input Resloution	Accuracy 1 Year (Measurement)	Accuracy 1 Year (Simulation)
Pt50 (a = 3851)	-220 to +850°C (-364 to +1562°F)	0.01°C	0.01% RDG + 0.05°C(0.09°F)	0.012% RDG + 0.18°C(0.324°F)
Pt100 (a = 3851)	-220 to +850°C (-364 to +1562°F)	0.01°C	0.010% RDG + 0.05°C(0.09°F)	0.012% RDG + 0.12°C(0.216°F)
Pt100 (a = 3916)	-200 to +510°C (-325 to +950°F)	0.01°C	0.010% RDG + 0.05°C(0.09°F)	0.012% RDG + 0.12°C(0.216°F)
Pt100 (a = 3926)	-210 to +850°C (-328 to +1562°F)	0.01°C	0.010% RDG + 0.05°C(0.09°F)	0.012% RDG + 0.12°C(0.216°F)
Pt200 (a = 3851)	-220 to +600°C (-364 to +1112°F)	0.01°C	0.010% RDG + 0.12°C(0.216°F)	0.012% RDG + 0.33°C(0.594°F)
Pt500 (a = 3851)	-220 to +600°C (-364 to +1112°F)	0.01°C	0.010% RDG + 0.07°C(0.126°F)	0.012% RDG + 0.18°C(0.324°F)
Pt1000 (a = 3851)	-60 to +850°C (-364 to +1112°F)	0.01°C	0.010% RDG + 0.05°C(0.126°F)	0.012% RDG + 0.08°C(0.144°F)
Ni100 (a = 618)	-60 to +180°C (-76 to +356°F)	0.01°C	0.010% RDG + 0.03°C(0.54°F)	0.012% RDG + 0.08°C(0.144°F)
Ni120 (a = 672)	-40 to +205°C (-40 to +401°F)	0.01°C	0.010% RDG + 0.03°C(0.54°F)	0.012% RDG + 0.08°C(0.144°F)
Ni1000 (a = 618)	-60 to +180°C (-76 to +356°F)	0.01°C	0.010% RDG + 0.03°C(0.54°F)	0.012% RDG + 0.08°C(0.144°F)
Cu10 (a = 427)	-50 to +150°C (-58 to +302°F)	0.01°C	0.010% RDG + 0.18°C(0.324°F)	0.012% RDG + 0.1°C(0.18°F)
Cu50 (a = 428	-50 to +150°C (-58 to +302°F)	0.01°C	0.010% RDG + 0.06°C(0.108°F)	0.012% RDG + 0.15°C(0.27°F)

Resistive probes measurements in 2, 3 or 4 wires: automatic recognition of number of connected wires, with indication on screen.
Accuracies are given for 4-wire mounted probes
Take into account particular error of temperature sensor used and implementation conditions
Measuring current: 0.25 mA (Measurement) or from 0.1 to 1 mA (Emission)
Temperature coefficient: < 10% of accuracy/°C

C100 Process Calibrator DC Current Simulation Table

With or without Loop Supply

Range	Resolution	Accuracy/1yr
24 millamp	1µA	0.012% RDG + 2 µA
0 to 20 millamp	1µA	0.012% RDG + 2µA
4 to 20 millamp	1µA	0.012% RDG + 2 µA

Temperature Coefficient <10 ppm/°C beyond reference domain
Settling time: <5 ms
Specifications given for C100 configurations in:
- Active mode (+24V ON) 1 Meter in passive mode (+24 V OFF)
- Passive mode (+24 V OFF) 1 Meter in active mode (+24 V ON)

C100 Process Calibrator DC Current Measurement Table

With or Without Loop Supply

Range	Resolution	Accuracy/1yr	Rin
0 to 20 millamp	1µA	0.012% RDG + 2 µA	<25 Ω
4 to 20 millamp	1µA	0.012% RDG + 2 µA	<25 Ω
±50 millamp	1µA	0.012% RDG + 2 µA	<25 Ω

Temperature coefficient: <10 ppm/°C beyond reference domain
Loop supply: 24V ±10%
HART® compatibility: Input impedance Rin = 280Ω
Display with linear or quadratic scaling

C100 Process Calibrator DC Voltage Simulation Table

Range	Resolution	Accuracy/1yr	Minimum Load
+100 mV	1 µV	0.010% RDG + 3 µV	>1 kΩ
+2 Volts	10 µV	0.010% RDG + 20 µV	2 kΩ
+20 Volts	100 µV	0.012% RDG +200 µV<(1)/td>	4 kΩ
+50 Volts	1 mV	0.012% RDG +2 mV	4 kΩ

(1)Noise: 3 ppm (for 0.1 Hz to 10 Hz) and 5 ppm (for 10 Hz to 100 Hz)
Temperature coefficient: < 7 ppm/°C beyond reference domain
Settling time: < 5 ms

C55 Process Calibrator DC Voltage Measurement Table

Range	Resolution	Accuracy/1yr	Rin
+100 mV	1 µV	0.010% RDG + 3 µV	>10 MΩ
+1 V*	10 µV	0.010% RDG + 20 µV	>10 MΩ
+10 Volts	100 µV	0.010% RDG + 200 µV	>1 MΩ
+50 Volts	1 mV	0.015% RDG + 200 Mv	>1 MΩ

Temperature coefficient < 7 ppm/°C beyond reference domain
(1) Range Specified: -0.8 V to +1 V

C100 Process Calibrator Frequency, Pulse Simulation Table

Range	Resolution	Accuracy/1yr
1000 Hz	0.01 Hz	0.005% RDG
10 kHz	0.1 Hz	0.005% RDG

Temperature coefficient <5 ppm/°C beyond reference domain

C100 Process Calibrator Frequency, Counting Measurement Table

Range	Resolution	Accuracy/1yr
20 kHz	0.01 Hz	0.005% RDG

Temperature coefficient <5 ppm/°C beyond reference domain
Scale unit: Pulse/min and Hz
Trigger level: 1 V
Measurement on frequency signals or dry contacts
Counting will be performed on defined time or infinite time.

C100 Process Calibrator Resistance Simulation Table

Range	Resolution	Accuracy/1yr	Notes
40 Ω	1 mΩ	0.012% RDG + 3 mΩ 0.012% RDG + 10 mΩ	10 mA 1mA
400 Ω	10 mΩ	0.012% RDG + 20 mΩ 0.012% RDG + 30 mΩ	1/10 mA 1mA
4000 Ω	100 mΩ	0.012% RDG + 300 mΩ	0.1/1 mA

Temperature coefficient: <5 ppm/°C beyond reference domain
Current establishing time: <1 ms
Notes: Current received by the calibrator

C100 Process Calibrator Resistance Measurement Table

Range	Resolution	Accuracy/1yr	Notes
400 Ω	1 mΩ	0.010% RDG + 10 mΩ
4000 Ω	10 mΩ	00.010% RDG + 100 mΩ

Resistance measurement in 2, 3 or 4 wires: automatic recognition of number of connected wires, with indication on screen
Accuracies are given for 4-wire mounted probes
Temperature coefficient: <7 ppm/°C beyond reference domain
Open circuit terminal voltage: <10 V
Continuity test: Open circuit for R > 1000Ω and closed circuit for R <1000 Ω
Measurement current: 0.25mA

C100 Pressure: Measurement by external digital sensor Range Specification Table

Range	0 to 1 bar	0 to 3 bar	0 to 10 bar	0 to 30 bar	0 to 100 bar	0 to 300 bar	0 to 1000 bar
Absolute	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Relative	Yes	Yes	Yes	Yes

Available in relative, absolute and differential pressure.
Connector: ¼ gas
Resolution: 0.02% FS
Accuracy:-0.05% FS from 10 to 40°C; -0.1% FS from -10 to +10°C and from 40 to 80°C
This digital pressure module ACL433 is connected to C100 through RS485 serial cable to the digital input connector. All data are digital. Measurements are compensated in temperature by a polynomial correction implemented into the firmware at factory.