Thumbnail Filmstrip of New be Safe MULTI GAS Personal Gas Monitor Images

New be Safe MULTI GAS Personal Gas Monitor

Overview

Be Safe MG is the new portable multi-gas detector to be used in hazardous areas (ATEX Zone 0), integrating safety and periodic maintenance.

Features

4 Gas Model Includes Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S) and LEL Sensors
LCD Display for Concentration Values Readout
Audio, visual and vibration alarm
IP67 Rated
Approved for ATEX Zone 0
Fast Bump Test and calibration
Integrated alligator clip

Custom configuration are availabe with different gases.
Please contact us at 914-673-0333 for details

Price Starting At:
$950.00

Need help? Contact us with questions.

Shipping Estimated Shipping: 3 business days

Be Safe MG Gas Measurement Specifications

Gas Detected	Sensor Type	Measuring Range	Resolutoin	Response Time
Oxygen (O2)	Electrochemical	0 to 25% vol	0.1% vol	<10 sec
Carbon Monoxide (CO)	Electrochemical	0 to 1,000 ppm	1 ppm	<15 sec
Hydrogen Sulfide (H2S)	Electrochemical	0 to 100 ppm	1 ppm	<15 sec
LEL Sensors (Flammable)	MEMS	0 to 5% vol 0 to 100% LEL	0.01 % vol 1% LEL	<15 sec

be Safe MG Multi Gas Personal Gas Detector Technical Features

Size (HxWxD)	5.5 x 2.8 x 1.5 in ( 140 x 70 x 38 mm)
Weight	9.8 oz (200g)
Durability	Drop test from 3ft (1m) according to EN60079-0 (2018)
Ingress Protection	IP67C
Working Temperature	-4 to +131°F (-20 to +55°C>
Working Humidity	5 to 95 %RH (non-condensing relative humidity)
Typical Battery Life	up to 18 hours (dependent on sensor configuration) @ -4°F/-20°C
Alarms	Audio: 90 dB @ 30 cm Visual LED Vibration vibrating motor
Alarm Levels	Minimum, Maximum, STEL (Short Term Exposure Limit) and TWA (Time-Weighted Average)
Event Logging	408 days based on 8 hours shifts and 40 daily events
Data Logging	22 days based on 8 hour shifts every 10 seconds logging
Conformity	408 days based on 8 hours shifts and 40 daily events
Event Logging	EN 60079-0:2018 - IEC 60079-0:2017 EN 60079-1:2014 - IEC 60079-1:2014 EN 60079-11:2012 - IEC 60079-11:2023
Certifications & Approvals	ATEX: II 1G Ex da ia IIC T4 Ga (configuration with LEL sensor) II 1G Ex ia IIC T4 Ga (configuration without LEL sensor) (Certificate: TUV IT 24 ATEX 0162X) IECEx: Ex ia IIC T4 Ga (Certificate: IECEx TPS 23.0053X)
Warranty	36 months warranty for detector and sensor

Be Safe MG Kit includes: Portable gas detector, Docking station with wall-mount accessory, Calibration cap and gas tubing, USB cable, Quick Guide, Test report, Declaration of conformity ATEX and IECEx